Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Installation for Garland Homeowners
A new door installation in Garland typically costs between $700 and $2,200 for a standard door, with custom wood and oversized double doors running higher depending on materials and site conditions. Most installations are completed in one visit, usually four to six hours, after the door is measured and ordered. Servo Garage Doors has handled garage door installation in Garland since 2015, with more than 18,000 doors made right across the metroplex and a written price delivered before any work begins.
We don’t sidestep the hard questions. If you call us at (469) 949-6806, a live person answers, not a phone tree. We’ll talk through what’s on your house now, what’s failing, and whether the fix is a new door or something smaller. When you schedule, you get a named technician and an on-the-way text, not a four-hour window and a guess.
Garland’s clay soil and summer heat put real stress on door hardware. We see it every week: rusted bottom brackets, warped sections from afternoon sun on west-facing elevations, tracks pulled loose from a settle shift. None of that is hard to explain, and all of it matters to how long a new door will actually last here. Our documentation system exists because a homeowner should see what we found, in photographs, before they spend a dollar. Clause 4 of The Haven Standard is why the failed part gets photographed before anyone quotes a replacement.
Call (469) 949-6806 and we’ll give you a flat, written scope and price. No ‘call for a quote’ games. That’s Clause 1.
What Our Garage Door Installation Service Includes
Every installation we quote in Garland includes the same paper trail: a written scope, a photograph record, and a price that doesn’t move after you approve it. Here’s what each door type looks like in practice.
New Door Installation
A new door goes in when the existing one is beyond reasonable repair: a snapped torsion spring is a $180-$340 fix, but a door with rot in the bottom section, failing welds, or a bent rail isn’t worth patching. In Garland we regularly replace doors on homes built in the 2000s that have seen fifteen years of heat and humidity cycles. The first step is always a site measure: we check the opening width, headroom, side clearance, and whether the existing track is worth reusing. Then we quote a door that fits the opening and your budget, with the price written down before you decide anything.
Single Car Door
A single car door, usually 8’x7′ or 9’x7′, is the most common installation we do for Garland garages built before 2010. These are straightforward unless the framing has shifted, which we’ll catch during the pre-install check. We measure the floor for levelness and check the jambs for plumb before ordering any door. A single door install is typically the fastest job: one technician, one day, and a photo record at the end showing the tracks, hinges, and weatherstripping.
Double Car Door
A double door spans 16 feet or more, and everything about it is heavier and less forgiving: wider panels, heavier springs, and a top section that has to stay square across the whole opening. We see double-wide doors in Garland’s newer subdivisions, and we set them up with the correct torsion spring size from the start. The wrong spring isn’t just loud, it wears out the opener’s logic board and the door’s rollers. A double door install usually means two technicians on site so the panels go up without a twist.
Custom Garage Door
Custom work means the door wasn’t ordered from a stock chart, whether that’s an unusual width on an older Garland home or a specific architecture style, like a carriage-house door for a mid-century ranch. We’ll work from your opening measurements first, then talk through what’s actually available from the manufacturers, because a custom size doesn’t always mean a custom price. Some custom orders come from Clopay or Amarr with a three-to-four-week lead time. We quote the door and the labor separately, and the written scope includes every line item before we order anything.
Steel Doors
Steel is the working door in Texas: it holds up to hail, doesn’t warp in August humidity, and comes in an insulated version that makes a real difference in a south-facing Garland garage. We install a lot of 24-gauge and 25-gauge steel doors, and we’re direct about what gauge means for how the door feels and sounds when it moves. A heavier-gauge panel dents less and holds its shape longer. The downside is weight, so we make sure the track and springs are rated for the door we’re putting on it, not whatever was there before.
Wood Doors
Wood doors are the prettiest thing on the block and the most maintenance-hungry under a Texas sun. We’ve installed wood doors in Garland neighborhoods like Travis College Hill and The Shores, and we tell every customer the same thing: seal it, re-seal it every two years, and expect the southwest exposure to fade before the north side does. We handle solid wood, wood overlay on steel, and composite. The frame has to be dead level for wood to hang right, and our pre-install measure includes that check before we order panels.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Installation
We install and service all eight major garage door brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If it’s a door that’s on a house in Garland, we’ve probably put one in or fixed one in the last week.
Clopay is the most common door we install in Garland, especially their Coachman and Gallery lines. We know their panel profiles, their spring spec sheets, and how their insulated doors hold up to Texas heat. Amarr is the second most popular in this market: their Heritage and Classica doors are workhorses, and we stock the common hardware they need. Wayne Dalton is the brand we see most often on older Garland homes, particularly their 9100 and 9600 series, and we know the torque-master quirks well enough to tell you in advance whether the opener’s worth keeping. Craftsman doors are still everywhere, and we carry compatible parts for their openers as well.
Whoever made the door that’s on your house now, we can service it, and when it’s time to replace it, we can show you where the old one failed.
BeforeAfterSigns You Need Garage Door Installation Right Now
- Visible rot or rust through the bottom panel. In Garland’s humidity, the bottom section is the first thing to go. Once water’s inside the panel, the door’s structural integrity is done and insulation starts holding moisture against the steel. A new door fixes the issue instead of patching it.
- Track misalignment that keeps coming back. If the rollers jump the track more than once in a year, the problem isn’t the track, it’s usually a shift in the door or the framing around it. Re-aligning a track costs $120-$240, but if the door is torqued, it’ll fail again. We’ll tell you which kind of problem you have, with photographs, before recommending replacement.
- Two or more broken sections on a double door. A single panel replacement runs $250-$500. When you need three or four, you’re spending near the cost of a new door for a door that’s still old everywhere else. That math doesn’t need a sales pitch.
- Noise that’s gotten structural, not just squeaky. A door that grinds, pops, or shakes the opener rail isn’t annoying, it’s warning you about failing hardware. Roller replacement runs $110-$220, but when the panel hinges are wallowed out and the rail is bent, the honest fix is replacement.
- The door won’t seal at the floor or the sides. Garland gets real wind, and a door that doesn’t seat against the weatherstripping is a door that’s letting in dust, heat, and every bug in Dallas County. If the door’s too far out of square to adjust, it’s time to talk about what a new one costs.
Our Garage Door Installation Process - Step by Step
- 1
Call and a live person answers. You call (469) 949-6806, we answer. No IVR, no ‘leave a message and we’ll call you back.’ We’ll ask what’s going on with the door, what brand it is if you know it, and whether you want a new door or aren’t sure yet. We’ll also give you a time for the measure visit.
- 2
On-site measure and photo record. A background-checked, uniformed technician comes out, measures the opening, checks the floor and jambs, and photographs what’s there now. If the door failed in some observable way, you’ll see the evidence. That photo record is yours and it’s included, not optional.
- 3
Written scope and flat price. Here’s where we differ from most of the industry. You get a written scope describing exactly what we’ll install and a flat price for it. That price does not change after we start. Clause 1 of The Haven Standard says the written price comes before any work. We built the company on it in 2015 and haven’t deviated since.
- 4
Scheduled installation, name and on-the-way text. Once you approve, we schedule. You’ll have the technician’s name and a text when they’re headed your way. Installation takes about four to six hours for a standard door, longer for custom or wood.
- 5
Walk-through and written documentation. When the door is up, the tech walks it with you: open it, close it, watch the chain, listen, check the seal. You get a documented photo record of the completed work. If something isn’t right, it gets made right. The 365-Day Done Right Promise means the repair isn’t over just because the truck leaves.
How Much Does Garage Door Installation Cost in Garland?
A new garage door installation in Garland typically ranges from $700 to $2,200; for more detail, see our garage door installation cost guide. A basic single steel door, non-insulated, 8’x7′, starts around $700 to $1,100 installed. A double door with insulation, a belt-drive opener already on the wall, and standard hardware usually lands between $1,200 and $1,800. Custom wood doors, an oversized opening, or anything that requires frame work can push toward $2,200 and beyond, and we’ll tell you that on the measure visit, in writing.
What moves the price:
- Door size and material. Single vs. double, steel vs. wood, insulated vs. not. Each one changes the material cost directly.
- Track and hardware condition. If the existing tracks are bent or undersized, they need to be replaced, and that’s in the scope, not a surprise at the end.
- Opener compatibility. If you’re replacing the door but keeping the opener, we check whether the opener can lift the new door’s weight. If it can’t, we’ll show you the numbers and quote an opener install at $250-$550.
- Old door removal. We haul away the old door. It’s included in the flat price unless the old door is wood with lead paint, which requires special handling in Garland under EPA rules.
How to avoid overpaying: get a written price before work starts. If a company won’t put the number in writing, walk. That isn’t a negotiating tactic, it’s the entire reason The Haven Standard exists. Every Servo job since 2015 has had a written scope and flat price before a single part was ordered. And if you already have a written estimate from another company, bring the paperwork. We’ll give you a free second opinion on it, and no coupon or code is required.
Garage Door Installation Near Garland - Our Service Area
We install garage doors throughout Garland and the surrounding cities, including Richardson, Mesquite, Wylie, Dallas, Rockwall, Plano, Allen, Forney, Carrollton, Frisco, and Irving. If you’re in Garland proper, Firewheel, Duck Creek, or Travis College Hill, call us at (469) 949-6806 and we’ll have a technician out to measure. For our neighbors in the broader metro, see our pages on Garage Door Installation in Richardson and Garage Door Installation in Mesquite. We also handle garage door repair and emergency calls across the same footprint.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Installation in Garland
Garage Door Installation - Garland is the removal of an old garage door and the fitting and hanging of a new one, including panels, tracks, torsion springs, hinges, and weatherstripping, plus testing the door’s balance and the opener’s operation. It’s not just swapping panels, it’s verifying that the entire system, from the opener’s trolley carriage to the floor seal, works together. In Garland we do this with a written scope and a flat price before ordering anything.
A standard garage door installation takes four to six hours on site. Custom or wood doors take longer because the panels are heavier and the fitment is less forgiving. If the old door has lead paint or the tracks need replacement, we’ll account for that in the schedule before we start, not after. Call (469) 949-6806 and we’ll give you an honest timeline for your specific opening.
Garage door installation in Garland costs $700 to $2,200 for a standard door. Steel doors start lower, wood and custom doors trend higher, and double doors fall in the middle. The right way to get an exact number is to have us measure the opening and write the scope, which is free and comes with a flat price before you commit. Our Garage Door Installation in Garland page has the full breakdown.
Yes, we install and service all eight major brands including those four. If you have a Clopay that’s rusted through the bottom panel or an Amarr that’s out of square, we’ll tell you what’s fixable and what isn’t, with evidence. For a Craftsman opener paired with a new door, we check the opener’s lift capacity before we do anything else.
If your door is stuck open or won’t close and the house is unsecured, that’s an emergency and we answer 24/7. The initial emergency call is repair, not installation: we get the door secured and safe, then quote the replacement with a flat price. Emergency calls are answered by a live person, not a recording, at (469) 949-6806. We’ll send a named technician and an on-the-way text.
Every installation we do is covered by the 365-Day Done Right Promise: if it’s not right, we make it right. The manufacturer’s warranty on the door itself is included separately, and we’ll explain exactly what it covers and for how long, in writing. The promise is backed by The Haven Standard, not a handshake.
Clear the garage floor at least eight feet back from the door and park in the driveway if you can. Move anything fragile away from the walls near the tracks. We’ll handle the old door removal and haul-away. That’s the standard. If there’s a car in the garage that can’t be moved, let us know before the measure visit so we can plan around it.
Schedule Your Garage Door Installation Service in Garland Today
Call (469) 949-6806 for a free, no-obligation estimate on garage door installation in Garland. We’ll give you a flat, written price and a written scope before any work begins. That’s Clause 1 and it’s been the rule since 2015. If you have another company’s written estimate, bring it and we’ll give you a free second opinion.
Written by Marcus Deller, Owner at Servo Garage Doors Garland, serving Garland since 2015.