Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterGarage Door in Irving, TX
Garage door parts replacement in Irving runs $110-$340 for most common jobs, and full door installation runs $700-$2,200 depending on size, material, and HOA requirements. Irving’s mix of 1950s-70s ranch homes in North Irving and 1980s-2000s HOA-governed properties across Las Colinas means the same part can fail for different reasons here, and the fix often involves more than swapping a component. Call (469) 949-6806 for a written, flat price before any work starts.
Why Irving Homes Are Different
Irving sits on Blackland Prairie clay that swells during spring rain and contracts hard in August heat. The resulting ground movement shifts garage door frames out of plumb, binding panels and wearing rollers unevenly, especially in the 1950s-70s ranch homes of North Irving where original wood jambs have decades of movement behind them. It’s common to see a door that operated fine in June suddenly binding by September, because the frame moved a half inch over a dry summer.
Then there’s Las Colinas. The HOAs there enforce architectural control over garage door panel style, color, and material. A technician who installs a close-but-not-exact match on a damaged door can leave you with a violation notice and a fine, because even a slightly wrong shade of brown has triggered rejections. We keep Las Colinas community spec sheets on hand and pull the architectural guidelines before quoting any replacement panel or full door in that corridor.
The Dallas-Fort Worth hail corridor sends regular storms through Irving, so panel denting drives a meaningful share of replacement calls. Older torsion spring assemblies in the 1990s-2000s townhomes across Las Colinas are also approaching or past their 10,000-cycle design life, which is why spring failures account for a large share of Irving repair work.
Our Main Irving Services
Most Irving calls start with one of three problems: a broken spring, a door that won’t open, or a planned replacement that has to clear HOA review. Here’s what each job involves locally.
Garage Door Repair in Irving
Repair work in Irving is usually a torsion spring break, a snapped cable, or a door that’s off track from frame movement on clay soil. We diagnose the failure, photograph the broken component, and quote a flat price before any part is ordered or touched. In North Irving ranch homes, worn rollers and hinges on original hardware are especially common. See Garage Door Repair in Irving for full pricing and sub-job detail.
Garage Door Installation in Irving
New door installation in Las Colinas means matching HOA spec exactly, down to panel color and style. In North Irving, it often means reframing a sagging opening before the new door goes in. We quote the full scope in writing before ordering, and every installation closes with a documented photo record of what went in and how it was set. See Garage Door Installation in Irving.
Garage Door Opener Repair & Installation in Irving
Opener failures in Irving split between old chain-drive units in ranch homes with tired logic boards and wall-button wiring issues, and newer belt-drive openers in Las Colinas townhomes where limit switches drift. We cover both, plus new opener installation, with written scoping and flat pricing delivered before the work starts. See Garage Door Opener Repair & Installation in Irving for the detailed breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGarage Door Parts in Irving
Garage door parts failure follows a pattern in Irving. In North Irving’s ranch homes, original 1960s-70s hardware is past its service life, and rollers, hinges, and extension springs fail through fatigue. Across Las Colinas, homeowners face aging torsion springs nearing their 10,000-cycle limit, plus hail damage to panels. We stock common parts for Clopay, Amarr, and Wayne Dalton doors on the truck, and every quote is a flat, written price delivered before any work begins. See our Garage Door Parts hub for the full parts catalog and documentation standard.
Torsion Spring
Signs you need it
The door won’t lift, or it lifts a few inches and stops, and you may hear a loud snap from the garage.
What it costs in Irving
Torsion spring replacement in Irving runs $180-$340, including the spring, labor, and balancing.
How we do it
We measure wire diameter and coil count, install a matched pair when needed, and photograph the broken spring before quoting the replacement.
Cables & Drums
Signs you need it
You see a frayed or snapped cable, or the door hangs unevenly in the opening.
What it costs in Irving
Cable and drum work in Irving runs $130-$250, depending on whether one or both sides need replacement.
How we do it
We release tension safely, replace the cable or drum on the affected side, and rebalance the door before testing a full cycle.
Rollers & Hinges
Signs you need it
The door sounds louder than it used to, shudders on the way up, or a hinge shows visible cracking.
What it costs in Irving
Roller replacement runs $110-$220 in Irving; adding hinge replacement stays within that range for most single doors.
How we do it
We swap worn steel rollers for nylon, replace any cracked hinges, and lubricate the track and moving points before cycling the door.
What Garage Door Parts Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Torsion spring | $180-$340 |
| Cable repair | $130-$250 |
| Roller replacement | $110-$220 |
Do you carry parts on the truck?
Yes. We stock torsion springs, cables, rollers, hinges, and weatherstripping for the common brands in Irving, and most parts jobs finish in one visit.
Will the price change once you see the door?
No. The written price we quote after inspection is the price you pay, per Clause 1 of The Haven Standard. Call (469) 949-6806 for a free estimate.
Emergency Garage Door in Irving
A broken garage door spring at 7 a.m. in a Las Colinas townhome means a car trapped inside while the HOA starts noticing. A door off its track in North Irving means a garage that won’t close, which is a security problem, not just an inconvenience. We answer emergency calls live, 24/7, and send a named technician with an on-the-way text, not a callback window. See Emergency Garage Door for the full emergency protocol.
Broken Spring
Signs you need it
The door won’t open, and you heard a sharp snap from above the opening.
What it costs in Irving
Emergency spring replacement in Irving runs $180-$340, same range as scheduled work.
How we do it
We photograph the break, confirm the spring spec, install the replacement, and balance the door before leaving.
Door Off Track
Signs you need it
The door is crooked in the opening, won’t move, or has visible gaps at the rollers.
What it costs in Irving
Track realignment in Irving runs $120-$240, with any roller replacement adding $110-$220 if needed.
How we do it
We inspect the rollers and track for damage, reset the door in the track, and test a full open-close cycle before leaving.
What Emergency Garage Door Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Broken spring | $180-$340 |
| Door off track | $120-$240 |
| Cable repair | $130-$250 |
Can you come today?
Yes. We dispatch emergency calls to Irving the same day, and a named technician texts you with an arrival time. Call (469) 949-6806.
Will the emergency visit cost more?
No. Emergency work is billed at the same flat, written prices as scheduled work in Irving. You see the full price before any repair begins.
Brands We Service in Irving
We service and install all major brands, including Clopay, Amarr, Wayne Dalton, and Craftsman. Common parts for these lines are stocked locally, and we pull brand-specific specs before quoting. See our brands for the full compatibility list.
Pricing for Garage Door in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Spring repair | $180-$340 |
| Cable repair | $130-$250 |
| Opener repair | $120-$320 |
| Opener installation | $250-$550 |
| Panel replacement | $250-$500 |
| Track realignment | $120-$240 |
| Roller replacement | $110-$220 |
| New door installation | $700-$2,200 |
In Las Colinas, panel replacement and new door jobs run toward the upper end when HOA spec-matching requires a specific color, material, or style. In North Irving, older frames that need reframing push installation costs up. Whatever the scope, you get a flat, written price before any work starts.
Neighborhoods We Serve in Irving
We serve the full Irving area, with typical same-day response for repair calls and a scheduled measure for installations. The neighborhoods below are representative.
- Las Colinas
- North Irving
- Valley Ranch
- Heritage District
- Cottonwood Valley
Service Area - Cities Near Irving
Irving sits in the center of the metro, so we also cover the neighboring cities where Irving homeowners often have family or rental properties. See Dallas, TX, Mesquite, TX, Richardson, TX, and Garland, TX for local pricing and response details in those areas.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Garage Door in Irving
In Las Colinas, yes. Most HOAs require documented pre-approval for any door replacement, with exact spec-matching on panel style, color, and material. We pull the architectural guidelines before quoting and include compliance in the written scope.
Emergency calls in Irving get same-day response, with a named technician and an on-the-way text. Installation and replacement work is scheduled, not dispatched, and includes a free measure and written price first.
Yes. Irving’s Blackland Prairie clay swells and contracts with moisture, shifting door frames out of plumb. That’s why track realignment and roller replacement are year-round jobs in Irving, not just seasonal ones. We check alignment on every visit.
If your garage door needs parts, repair, or replacement in Irving, call (469) 949-6806 for a free estimate and a flat, written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"They sent a photo of the snapped torsion spring before quoting anything. Price on the estimate was the price on the invoice. I have never had that happen with a home repair."
- Dana W."Cables came off the drum on a Sunday. Someone answered, someone came, and the written warranty was one page I could actually read."
- Harriet L."Text came through with the technician name and photo twenty minutes before he arrived. Small thing, but I stopped worrying about who was at the door."
- Priscilla M.