Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterCable Repair in Garland, TX
Garage door cable repair in Garland typically costs between $150 and $350, depending on the type of cable system and whether the damage has caused the door to become uneven or jammed. If your garage door is crooked, making a loud grinding noise, or won’t open at all, the cables have likely snapped or slipped off their drums. Because high-tension cables hold the entire weight of your door, they are under significant pressure and should not be handled without proper equipment. At Servo Garage Doors Garland, we diagnose these issues immediately upon arrival through our Garage Door Repair services, providing a written price before any work begins, as required by Clause 1 of The Haven Standard.
When you need professional help, call us at (469) 949-6806. We provide same-day service across Garland, from the historic neighborhoods near downtown to the suburban areas bordering Rowlett and Richardson. We handle repairs for all major brands, including Clopay, Amarr, and Wayne Dalton. If you are experiencing issues with your system, our team is ready to provide a documented assessment. You can learn more about our full range of services on our Garage Door Repair in Garland page.
When You Need Cable Repair
Garage door cables are the unsung heroes of your door system, winding around drums to lift the door smoothly. When they fail, it is usually obvious. We see these failures regularly in our local climate, where humidity fluctuations can impact the tension and wear on the steel strands over time. Here are the signs that it is time to call for a repair:
- The door is crooked: If one side of the door appears higher than the other while opening or closing, a cable has likely snapped or slipped off the drum, causing the door to hang unevenly.
- Loud snapping or banging sounds: Cables are under immense tension. When they break, they often make a sharp, loud “pop” or “bang” that can be heard throughout the garage.
- The door won’t open or close: If the motor runs but the door doesn’t move, or if it moves a few inches and stops, the cable system is likely compromised and the safety sensors are preventing further operation to avoid damage.
- Visible fraying or rust: Inspecting your cables periodically is wise. If you see “bird-caging” (where the strands separate) or excessive rust, the cable is nearing a failure point and needs replacement before it snaps.
- Door is heavy to lift manually: If you pull the emergency release cord and find the door is impossible to lift, the spring system and cable system are likely completely failed.
If you notice any of these symptoms, avoid trying to force the door open or closed. Doing so can cause the door to bind in the tracks or damage the panels, potentially requiring Panel Replacement and leading to more expensive repairs. Call (469) 949-6806 for a professional inspection.
Our Cable Repair Process
At Servo Garage Doors Garland, we operate under The Haven Standard, which prioritizes transparency and documentation. We do not guess at the problem; we show you the evidence. Our process ensures you know exactly what is wrong and what it will cost before we turn a single wrench.
- Arrival and Assessment: Our technician arrives in a marked vehicle, ready to inspect the entire door system. We identify the specific point of failure, whether it is a snapped cable, a drum issue, or a misaligned pulley.
- Photo Documentation: Following Clause 4 of The Haven Standard, we photograph the failed component. You see exactly what we see-a broken cable or worn drum-before we suggest a replacement.
- Written Scope and Price: We provide a flat, written price for the repair. There are no surprise fees or “hidden” costs added later. You approve the scope and the price in writing before we start.
- Cable Replacement: We replace the cables using high-quality, galvanized steel replacements that match the specific weight and height of your door. We ensure the tension is balanced correctly so the door operates smoothly.
- Safety Check and Final Record: Once the repair is complete, we perform a multi-point safety check, testing the balance and the safety reverse features. You receive a documented record of the work performed, providing you with a clear paper trail for your home maintenance records.
BeforeAfterCable Repair Pricing in Garland
We believe in upfront, honest pricing. We do not use “call for a quote” to trap you into a sales pitch. While exact pricing depends on the specific hardware your door requires-such as standard lift cables versus high-lift or vertical-lift cables-we can provide general ranges for local Garland homeowners.
| Service Item | Estimated Price Range |
|---|---|
| Standard Cable Replacement (Pair) | $150 - $250 |
| Heavy-Duty/Extended Cable Replacement | $200 - $350 |
| Drum and Cable Assembly Repair | $250 - $400 |
These prices include the parts and labor. If you have a written estimate from another company, bring it to us. We offer a Free Second Opinion on any competing written estimate. You do not need a coupon; just show us the paperwork, and we will evaluate the scope and provide our own transparent assessment. Call (469) 949-6806 for an exact quote today.
FAQs - Cable Repair
How much does it cost to replace garage door cables in Garland?
Most cable replacements in Garland range from $150 to $350, depending on the door size and the type of cable needed-see How Much Does Garage Door Repair Cost? (2026 Price Guide) - Garland, TX for more details. We provide a firm, written price before starting any work, so you never have to guess about the final bill. Call (469) 949-6806 for a free estimate.
Can you fix my garage door cable today?
We prioritize emergency calls, and in many cases, we can provide same-day service for cable repairs in Garland. Because we are independently owned and operated, we manage our own schedule to ensure we can reach our neighbors when they need us most. Call our live, 24/7 team at (469) 949-6806 to check our current availability.
Is it safer to repair or replace the cables?
When a cable is frayed, rusted, or snapped, it must be replaced. We do not recommend repairing a broken cable, as the integrity of the steel has been compromised. Replacing the pair is standard practice because if one cable has failed due to age or wear, the other is likely close behind. We will always show you the failed component, as required by our documentation standards, so you can see why replacement is the necessary path.
Do I need to be home for the garage door cable repair?
Yes, we prefer that you are home. Because we operate under The Haven Standard, we need to show you the photo record of the failed part and walk you through the written scope of work before we begin. This ensures that you have full visibility into the repair process and the costs involved. We work around your schedule to make this as convenient as possible.
If you have questions about your specific garage door system, our team is available 24/7 to answer your call. We don’t use automated recordings; you will speak with a real person who can help you determine the next steps. Whether you have a Craftsman, Genie, or other major brand, we have the parts and the expertise to help. Call (469) 949-6806 to schedule your repair today.
Written by Marcus Deller, Owner at Servo Garage Doors Garland, serving Garland since 2015.